Product Details Product Name: Hive L50-3
Type: Lithium Iron Phosphate (LiFePO ₄) Battery
Installation method: wall mounted/floor standing
Rated capacity: 50Ah
Rated voltage: 51.2V
Energy storage capacity: 2.56kWh
Cycle life: ≥ 6000 cycles (@ 80% DOD, 25 ℃)
Communication interface: RS485 / CAN
Parallel Expansion: Supports parallel expansion of multiple battery groups
Protection level: IP65 (waterproof and dustproof, suitable for indoor and outdoor use)
Working temperature range:- 20℃ ~ 55℃
Size: 450mm × 540mm × 140mm (approximately)
Weight: ≈ The 27kg Hive L50-3 is suitable for home energy storage, off grid applications, small commercial energy storage, and backup power supply, helping to efficiently utilize clean energy!
Advantages and Characteristics
High safety: using lithium iron phosphate battery cells, safe and stable, with strong resistance to thermal runaway
Long lifespan: Cycle life ≥ 6000 times, ensuring long-lasting durability
Efficient energy management: intelligent BMS system, supporting real-time monitoring and optimization of battery status
Flexible installation: Supports wall mounted or floor standing installation, suitable for different home environments
IP65 protection level: waterproof and dustproof, suitable for various indoor and outdoor application scenarios
Strong compatibility: Supports RS485/CAN communication, compatible with mainstream inverter brands
Intelligent parallel connection: expandable to multiple battery packs to meet larger energy storage needs in various application fields
Home energy storage: In conjunction with photovoltaic systems, it increases the rate of self consumption and reduces electricity bills
Small commercial energy storage: providing backup power for small office buildings and shops to ensure the operation of critical loads
Off grid application: suitable for remote areas, outdoor facilities and other scenarios without grid access
Backup power supply: provides stable emergency power to prevent power outages from affecting daily life and work
Hive L50-3, Help you build efficient, safe, and intelligent home and small business energy storage systems!
| Model | Hive L503 |
| Nominal capacity | 5.12kWh |
| Module Number | 1pcs |
| Dimension (mm) | 621*233.5*557 |
| Weight | 87kg |
| Chemistry | LiFePO4 |
| Battery Module | 5.12kWh |
| Nominal voltage | 51.2V |
| Operating voltage range | 40V-58.4V |
| Max charge/discharge current | 100A |
| Cycle life | >5000 Cycles(70%DOD) |
| Communication method | CAN,RS485 |
| Operating temperature range | Charging: 0-55°C Discharging:-20-55°C |
| Storage temperature range | -20-40°C |
| Humidity | <95% non-condensing |
| Altitude | < 4500m |
| Protection level | IP20 |
| Cooling method | Free Cooling |
Note: The range for stacking battery modules is from 1 to 6 modules.
Precautions
- Temperature Management: The battery should only be charged between 0°C to 55°C and discharged between -20°C to 55°C. Exceeding these limits can lead to reduced performance or damage to the cells
- Avoid Overloading: Ensure that the battery is not charged or discharged beyond its specified maximum current of 300A, as this can cause overheating or shorten the battery’s life
- Environmental Considerations: Keep the battery in a non-condensing environment with humidity less than 95%. Avoid placing the battery in areas where condensation or excessive moisture could occur, as this may lead to corrosion or short circuits
- Altitude Limit: Operate the battery only in locations where the altitude is below 4500 meters. At higher altitudes, performance may degrade due to lower air pressure affecting the cooling efficiency
- Proper Ventilation: Although the battery uses free cooling, make sure it’s installed in a well-ventilated area to allow for adequate air circulation, preventing overheating
- Storage Precautions: If the battery is not in use, store it in temperatures ranging from -20°C to 40°C to prevent cell degradation and ensure optimal performance upon reactivation
- Handle with Care: With a weight of 149kg, ensure proper handling and installation procedures to avoid injury or damage to the battery. Using proper mounting brackets and securing the battery is crucial for safe installation
- Protection Level: If using the standard IP20 version, avoid installing the battery in outdoor or overly dusty environments. For greater protection, opt for the IP65-rated version for semi-outdoor installations.
